Service area · Avondale, Arizona
Concrete cutting in Avondale.
Core drilling, wall sawing, slab sawing, and green cutting in Avondale from Concrete Coring Company, the Phoenix crew that has been cutting the Valley since 1961.
The I-10 warehouse corridor, the auto dealers on the boulevard, and everything along the Agua Fria. Avondale is a short run west on the 10.
Same men, same equipment, same 24/7 number as every other job we do. Asphalt, block, and concrete, we cut it all, and we have been doing it in Arizona since 1961 under license ROC071382.
What we do in Avondale
Core drilling in Avondale is the call we get most, but the same crew and the same trucks cover every cut on this list — wall sawing, slab sawing, green cutting, grinding, GPR scanning and demolition, anywhere in Avondale or the surrounding area.
- Core Drilling: Holes through anything, up to 64″ diameter. Whatever the special request, we have the resources to accommodate it.
- Wall Sawing: Door, window, HVAC and structural openings cut clean through concrete and block.
- Slab Sawing: Floors, roads, and lots. We regularly take the jobs other slab sawing companies can’t.
- Green Sawing: Control joints cut the day of the pour with Soff-Cut saws. Zero risk of losing the slab.
- Concrete Grinding: High spots, trip hazards, and rough edges ground smooth.
- GPR Scanning: Ground-penetrating radar finds the rebar, conduit, and cables before the blade does.
- Demolition: Cut it, break it, haul it. Selective concrete removal without the collateral damage.
Why Avondale contractors call us
- Open 24/7. Nights, weekends, and the 5am start that keeps your schedule on track.
- No job is too big or too small. We have drilled up to 64″ diameter, and whatever the special request, we have the resources to accommodate it.
- Our men are trained to work safe and leave the job clean.
- Blades made special for us, because Valley river rock eats ordinary diamonds.
Tell dispatch the address in Avondale, what needs cutting, and when. You’ll get a straight answer and a truck.
Avondale questions we get
Do you serve the I-10 industrial corridor in Avondale?
Yes. Commercial and industrial work along the corridor is regular work for us -- trenching, equipment pads, dock and door openings, and selective demolition.
Can you remove concrete without wrecking what is around it?
Yes, that is the point of cutting rather than breaking. We saw the piece out, lift it, and haul it, leaving the surrounding slab and the finishes alone.
Do you cut asphalt in Avondale too?
Yes. Asphalt, block and concrete, we cut it all -- parking lots, drives, and utility trenches.
Do you scan before coring in Avondale?
Yes. GPR scanning locates rebar, conduit and post-tension cable before the bit touches the slab, and we mark the clear zones on site.
Do you take small jobs, or only big ones?
Both. No job is too big or too small. We have drilled up to 64 inches in diameter and we will just as happily put one core through a footing.
Asphalt, block, and concrete. We cut it all.
For your job, we will go anywhere. One number, answered 24/7, and a crew that has been cutting Arizona since 1961.
Call 602-268-1439