Service area · Mesa, Arizona
Concrete cutting in Mesa.
Core drilling, wall sawing, slab sawing, and green cutting in Mesa from Concrete Coring Company, the Phoenix crew that has been cutting the Valley since 1961.
Core drilling · Mesa
Fifteen ten-inch cores at Mesa Academy.
Fifteen 10-inch cores through an eight-inch slab at Mesa Academy, run down the walk tight against the building. Marked, cored, slugs set back in, and the walkway coned off from the truck to the last hole.
Ten inches through eight inches of slab is straightforward drilling. Doing it on a school walk is the part that takes thought: the rig anchors right against the wall, the lane stays closed while the barrel is turning, every hole gets its slug dropped back in so nobody steps into one, and the water goes in the truck instead of down the sidewalk.
- Core Drilling: fifteen 10″ cores, straight through an 8″ slab.
- Schools, campuses and occupied sites — coned, controlled, and handed back walkable.
- Off-hours when the calendar calls for it. Nights, weekends, and school breaks.
Core drilling · Mesa
Coned off from the truck to the last hole.
A school walk stays a school walk. The lane is closed while we are in it, the holes are plugged as we go, and when the truck pulls out there is nothing left behind for anybody to trip over.
From the Falcon Field industrial parks to the Fiesta District and out past the 202 toward Apache Junction, Mesa is a regular stop for our trucks.
Same men, same equipment, same 24/7 number as every other job we do. Asphalt, block, and concrete, we cut it all, and we have been doing it in Arizona since 1961 under license ROC071382.
What we do in Mesa
Most Mesa jobs start as core drilling in Mesa and grow from there, so we bring the whole list — wall sawing, slab sawing, green cutting, grinding, GPR scanning and demolition — off the same trucks, with one number to call.
- Core Drilling: Holes through anything, up to 64″ diameter. Whatever the special request, we have the resources to accommodate it.
- Wall Sawing: Door, window, HVAC and structural openings cut clean through concrete and block.
- Slab Sawing: Floors, roads, and lots. We regularly take the jobs other slab sawing companies can’t.
- Green Sawing: Control joints cut the day of the pour with Soff-Cut saws. Zero risk of losing the slab.
- Concrete Grinding: High spots, trip hazards, and rough edges ground smooth.
- GPR Scanning: Ground-penetrating radar finds the rebar, conduit, and cables before the blade does.
- Demolition: Cut it, break it, haul it. Selective concrete removal without the collateral damage.
Why Mesa contractors call us
- Open 24/7. Nights, weekends, and the 5am start that keeps your schedule on track.
- No job is too big or too small. We have drilled up to 64″ diameter, and whatever the special request, we have the resources to accommodate it.
- Our men are trained to work safe and leave the job clean.
- Blades made special for us, because Valley river rock eats ordinary diamonds.
Tell dispatch the address in Mesa, what needs cutting, and when. You’ll get a straight answer and a truck.
Mesa questions we get
Do you cover the east Valley out of a west Valley shop?
Yes. Our trucks run the whole Valley every day and Mesa is a regular stop. Distance does not change the price of the cut; tell dispatch the address and you will get a straight number.
Do you do industrial and warehouse slab work in Mesa?
Yes. Trenching through warehouse floors for new equipment, machine pits, dock work and column footings. Big slabs and thick pours are ordinary work for us.
Can you cut without shutting the whole building down?
Usually. We cut wet, control the slurry, and section the work so the rest of the floor keeps running. Tell us what has to stay open and we plan around it.
Do you scan for post-tension in Mesa?
Yes. GPR scanning before any core or saw cut where cable, conduit or rebar could be in the way, marked in the field, with a written scan report if you need one.
Are you open outside business hours?
Open 24 hours, 7 days a week, including the 5am start when that is what keeps your schedule.
Asphalt, block, and concrete. We cut it all.
For your job, we will go anywhere. One number, answered 24/7, and a crew that has been cutting Arizona since 1961.
Call 602-268-1439